large flexural testing machine , Various Fixture Electronic Universal Testing Machine Matched With Friendly Interface
1. application
The electronic universal testing machine equipped with large span bending / flexural test accessory can be used to determine and research ant-flexural propertie and bending properties of various non-metal composite board.
The universal testing machine (UTM), also known as a universal tester, materials testing machine, materials test frame or tensometer, is used to test the tensile strength and compressive strength of materials. It can perform many standard tensile and compression tests on materials, components and structures, in other words, that it is versatile.
2. specification
| Model |
WTD-5/10/20/50 |
WTD-100 |
WTD-200/300 |
WTD-500/600 |
| Max. capacity(kN) |
5/10/20/50 |
100 |
200/300 |
500/600 |
| Measuring range |
1%~100%FS(0.4%-100%FS) |
| Grade |
Grade 1(Grade 0.5) |
| Force resolution |
1/400000 |
| Deformation measuring range |
2%~100%FS |
| Relative error of deformation value |
+/-1%(+/-0.5%) |
| Deformation resolution |
1/400000 |
| Force speed |
0.01-50 kN/s |
| Deformation speed |
0.01-30mm/min |
| Displacement speed |
0.01-500mm/min (can be 1000mm/min) |
0.01-300mm/min |
0.01-250mm/min |
| Tensile fixture for round and flat specimen |
Standard one set tensile fixture for round specimen, one set tensile fixture for round specimen, one set of compression platen, other test fixture can be equipped according to client’s requirement or relative test method |
| Extensometer |
According to test materials or client’s requirement |
| High and low temperature test |
According to relative test method or client’s requirement |
| Max. stroke of crossbeam |
1090mm |
1070mm |
1140mm |
1200mm |
| Effective tensile space (equip with metal tensile fixture) |
800mm |
700mm |
600mm |
600mm |
| Distance between columns |
430mm |
550mm |
600mm |
625mm |
| Power |
220V,1.0kw |
220V,2kw |
220V,3kw |
380V,4kw |
| Dim. Of loading frame(cm) |
79x43x186 |
92x50x198 |
110x60x241 |
130x87x250 |
| Weight |
400kg |
700kg |
1150/1250kg |
2500kg |
3. features
This universal testing machine adopts two strong supports, precise load cell to measure the load. Its crosshead can move up or down at a constant speed.
This universal testing machine can program the crosshead speed or conduct cyclical testing, allow testing at a constant force, testing at constant deformation, testing at constant displacement, etc.
This testing machine can equip with extensometers to measure the extension or deformation.
According to test requirement for temperature, humidity, pressure, etc, special device, such as environmental chamber can be placed around the test specimen to do test in certain temperature, humidity or pressure.
Matched with various test fixture, like peal, puncture, tear, pneumatic grip, belt tension, etc. This UTM can be used to metal, non-metal, composite materials like rubber, steel wire, plastic, seat belt, textile character test.
Protecting functions of over load, over current, over voltage, crosshead limit moving space protection, auto stop at break.
4. Good Packaging:
Good Packaging: Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
